Using a robot in production
Nächste Sitzungen
On request
31, Rue Jean Esswein 85000 La Roche Sur Yon FRANCE
On request
235, rue de la Prairie Parc Industriel Sud 01100 Groissiat FRANCE
Schulungsziele
Know how to operate the robot.
Be able to diagnose routine anomalies.
Details des Programms
PRINCIPLES OF THE CONTROL SYSTEM
Hardware
Safety
Initialization procedures
Movements in manual mode
End Of Arm Tooling (EOAT): installing, checking
STARTING PRODUCTION
Choosing the program
Home return and the first cycle
End of production
Changing the cycle’s parameters in auto mode
TROUBLESHOOTING
Understanding the fault messages
Troubleshooting and researching after a fault
Pädagogische Modalitäten
All of our courses are based on alternating between the transfer of know-how and good practice, with concrete exercises and real-life situations.
All trainees will be given a folder containing the documents, exercises and corrections of the practical work done during the course.
Bewertungsmodalitäten
Trainees are assessed by the trainer for each module to measure the knowledge acquired at each step of the course, through practical work.
Zyklus
Betrieb
Kontrolle und Steuerung
Visual 2
VISUAL
Visual 3
6X_VISUAL3
Dauer
1 day / 7 hours
Öffentlich
Bediener
Einrichter
Verlangte Kenntnisse
None.
Personenanzahl
3 to 8 persons maximum
Zugangsmodalitäten
Open to everybody
Formalisierung am Ende der Schulung
Attendance sheet provided by SEPRO
Das könnte Sie auch interessieren:
Visual 2 / Visual 3
Using a robot in production
Know how to operate the robot. Be able to diagnose routine anomalies.
USA
English
1 whole day or 2 half days - Indicative duration
Visual 2 / VISUAL / Visual 3 / 6X_VISUAL3
Using a robot in production
Know how to operate the robot.
Be able to diagnose routine anomalies.
USA
English
1 day / 7 hours
Visual 2 / VISUAL / Visual 3
Creating production cycles
Know how to operate the robot.
Be able to diagnose routine anomalies.
Be able to create production cycles with Simple Pick & Place and EPS.
USA
English
1.5 day / 10.5 hours