Programming and optimising production cycles
Próximas sesiones
On request
37 Waterside Barns, Lodge Farm Centre, Castlethorpe Business, Milton Keynes MK19 7ES
Objetivos de la formación
Be able to analyse and program simple applications (part grip and release). Be able to optimise a program.
Detalle del programa
- PRINCIPLES OF THE NUMERIC CONTROL
SYSTEM
Hardware Safety Procedures for starting production Production: start - stop
- CREATING CYCLES
The Simple Pick & Place module Creating cycles with Simple Pick & Place
The cycle parameters
- PROGRAMMING
Program structure Basic instructions Writing and testing a simple program with cycle parameters IMM / Robot interface Creating and testing a program with interface
- OPTIMISING PRODUCTION CYCLES
Extended programming of the numeric axes and cycle options Numeric control system’s capacities Creating and testing an optimised program Memory management Creating EPS sources The condition test Studying the functions: . Programming on the PC . Simple palletising . The cycle counters Studying real applications
Ciclo
Programar
Control de mandos
Visual 2
VISUAL
Duración
4 days, of which 50 % practical work - Indicative duration
Público
Reguladores
Técnicos Métodos
Técnicos Mantenimiento
Nociones exigidas
None
También podría estar interesado en :
Visual 2 / VISUAL
Programming PLCs and managing peripheral units
Be able to use the robots’ most advanced functions.
Estados Unidos
Inglés
3 days, of which 50% practical work.
Visual 2 / Touch 2 / Visual 3
Level 1 - Programming and basic operation course
Covers robot operation, programming, robot and controller cabinet hardware, troubleshooting simple fault and periodic maintenance.
Estados Unidos
Inglés
3.5 days
Visual 2 / VISUAL
Programming and optimising production cycles
Be able to analyse and program simple applications (part grip and release). Be able to optimise a program.
Estados Unidos
Inglés
4 days, of which 50 % practical work - Indicative duration